Go to GROUPS at the bottom of the screen and select ADD GROUP.
Here you add all the groups that supply the charging stations with power. Fill in the Group name and Ampere, (only the ampere value) and select SAVE.
Go to DEVICES at the bottom of the screen, then select the charging station you want to configure.
Once inside the charging station, you choose which electrical group that supplies it with power and name the outlets after consultation with the customer, (usually according to the name of the parking lot).
Scroll down and select NETWORK SETTINGS.
Here you have 2-3 dropdown menus depending on the type of charging station you have: Ethernet (br0), Wi-Fi (wlan0), and in some cases also LTE. Select that menu according to how your charging station is connected to internet and check that it has internet connection as shown in the picture. If connected via Wi-fi, check that the signal strength is at least -75DBM. Repeat this procedure on all charging stations in the facility until all are configured.
When all charging stations are configured and ready, select the button SYNC at the top of the screen to save your changes to our server.
Done! Now it´s time to test the outlets.
Go to the tab OVERVIEW and select ENABLE TEST MODE. Then test the outlets.

Download app & login