Network settings

When you log in to the device via Bluetooth, you can modify the network settings if the default settings do not work.

Device settings

CtType – Type of current transformer, configured as follows:
- 100A – YHDC_SCT013 and Ct Primary Current 100
- 400A – 400A/0.333V and Ct Primary Current 400
Measure Voltage – Here, you can set whether the meter should measure voltage or not.
- If you choose to power the unit via USB-C, this setting should be set to NO, and the device will then calculate statically at 230V per phase.

Configuring SmartPi PowerMeter